|
EX series - high power at low cost
The EX series provides high levels of power at surprisingly low cost.
The attractive case style is highly compact using the minimum of bench space. The fan-less design provides silent operation *. The low weight makes them easy to move about.
Mixed-mode regulation
The EX series combines switch-mode pre-regulation with linear post-regulation to provide performance comparable with an all linear design.
Excellent line and load regulation is matched by low noise and good transient response. High power efficiency makes fan cooling unnecessary *.
Constant voltage or constant current
The main outputs can operate in constant voltage or constant current mode with automatic crossover and mode indication. Coarse and fine voltage controls are provided. The current control is logarithmic enabling low current levels to be set accurately.
Simultaneous digital metering
The EX series incorporate separate digital voltage and current meters on each main output. The meters use bright 14mm (0.56") LED displays and have an update rate of 4 per second providing near instantaneous response.
Simultaneous metering of voltage and current provides accurate information “at a glance” and avoids any possibility of misinterpretation.
When an output switch is set to “off”, the current limit setting is
displayed enabling conditions to be set before the load is connected.
|
|
Auxiliary low-voltage output
The EX354Tv incorporates a third output
variable between 1.5V and 5.0V with a fixed current limit of 5A.
The set voltage can checked using the digital displays.
Single, dual or triple outputs
EX series units are available in single, dual or triple output versions.
The EX354D, for example, has two independent and isolated outputs each with a 0 to 35V, 0 to 4A capability. The outputs can be wired in either series or parallel to provide voltages up to 70 volts or currents up to 8 amps.
The EX354T has an additional ‘logic voltage’ output with a 5A current capability. This output
is fully variable between 1.5V and 5.0V.
Output voltages up to 150V
The EX752M is a dual output 300 watt PSU with Multi-Mode capability. This enables it to operate as a dual power supply with two independent and isolated outputs, or as a single power supply of double the power.
As a dual, each output provides 0 to 75V at 0 to 2A (mode A). As a single the output can be selected as either 0 to 75V at 0 to 4A (mode B) or 0 to 150V at 0 to 2A (mode C). In single modes, the unused half of the unit becomes completely inoperative and its displays are blanked.
Safety and reliability
The EX series has been designed to meet the stringent requirements of relevant IEC standards for safety and EMC. All outputs are intrinsically short circuit proof, and are protected against external voltages and reverse currents.
|
Single, Dual or Triple isolated outputs, 0 to
35V
